============================================================
TITLE: Ambrell Video | Forming steel parts with induction
TYPE: article
VERSION: 2
VERSION_ID: 8a2e41b8-19e7-40f7-a547-05d2cba7b6dd
GENERATED_AT: 2026-04-28T13:13:56.153Z
SUMMARY: In this application video, a steel part is heated to 1100°F for a forming application. An Ambrell EKOHEAT 65 kW/100 kHz induction heating system is used for this application.
DATE MODIFIED: February 6, 2026
READING TIME: 1 min
WORD COUNT: 68
KEYWORDS: Ambrell Video, Forming steel parts with induction
SOURCE URL: https://www.ambrell.com/induction-heating-videos/forming-steel-parts-with-induction
============================================================

KEY TAKEAWAYS:
  * In this application video, a steel part is heated to 1100°F for a forming application
  * In this application video, a steel part is heated to 1100°F for a forming application
  * In this application video, a steel part is heated to 1100°F for a forming application

# Forming steel parts with induction

In this application video, a steel part is heated to 1100°F for a forming application. An Ambrell EKOHEAT 65 kW/100 kHz induction heating system is used for this application.


------------------------------------------------------------
ABOUT THIS CONTENT
------------------------------------------------------------
Source: https://www.ambrell.com/induction-heating-videos/forming-steel-parts-with-induction

This content is provided for informational purposes.
Please visit the original source for the most up-to-date information.