---
title: "Ambrell Video | Soldering a Pipe to an Elbow"
description: "Flux is applied to the brass elbow and the copper pipe. The 2 inch coupling is fully soldered in about 40 seconds with an excellent fillet and without flame"
type: article
version: 2
version_id: "f57b2844-cb29-4b4e-99fa-62e29c67a8c7"
generated_at: "2026-05-04T13:48:39.265Z"
date_modified: "2026-01-23T13:50:57.137Z"
language: en-us
reading_time: "1 min"
word_count: 70
keywords: ["Ambrell Video", "Soldering a Pipe to an Elbow"]
url: "https://www.ambrell.com/induction-heating-videos/soldering-a-pipe-to-an-elbow"
---

# Ambrell Video | Soldering a Pipe to an Elbow

> Flux is applied to the brass elbow and the copper pipe. The 2 inch coupling is fully soldered in about 40 seconds with an excellent fillet and without flame

## Key Takeaways

- Flux is applied to the brass elbow and the copper pipe
- Flux is applied to the brass elbow and the copper pipe
- Flux is applied to the brass elbow and the copper pipe

# Soldering a Pipe to an Elbow

Flux is applied to the brass elbow and the copper pipe. The 2 inch coupling is fully soldered in about 40 seconds with an excellent fillet and without flame

---

## About This Content

**Source:** [Ambrell Video | Soldering a Pipe to an Elbow](https://www.ambrell.com/induction-heating-videos/soldering-a-pipe-to-an-elbow)

*This content is provided for informational purposes. Please visit the original source for the most up-to-date information.*